Automatically importing measurement results after each trigger with BenchVue Oscilloscope
Automatically importing measurement results after each trigger with BenchVue Oscilloscope
Frequently Asked Questions (FAQs). BenchVue Oscilloscope’s Measurement / Trace Datalog feature can wait indefinitely for trigger events and automatically import measurement results after each trigger. Can BenchVue Oscilloscope wait for the scope to trigger and automatically import measurement results after each trigger? BenchVue Oscilloscope’s Measurement / Trace Datalog feature can wait indefinitely for trigger events and automatically import measurement results after each trigger. If the oscilloscope’s trigger mode is Normal (InfiniiVision) or Triggered (Infiniium) instead of the default Auto, it will wait indefinitely for trigger events: BenchVue allows the user to select the Normal or Triggered trigger mode under the Instrument Settings tab. In this mode, BenchVue waits for the oscilloscope to trigger before importing each set of measurement results: Under the Measurement / Trace Datalog tab, you can set up BenchVue to automatically import measurement results after each trigger, as shown below. At the end of the run, you can export all the measurements in your choice of formats. The attached example file was created by exporting a set of 267 measurements (3 for each of 89 triggers) in Excel format. Attachments. MSO-X 3104T Data Log 2020-06-17 17-03-47 0.xlsxSee Also Automatically importing waveform data after each trigger with BenchVue Oscilloscope